Profile
Quantity
estimator
CALCULATOR

how many PROFILES do you need for your project?

Use our online batten estimator calculator below as a guide to help you determine how many aluminium battens and aluminium cladding panels you will need for your project.

Name

This field is for validation purposes and should be left unchanged.

PROFILE TYPE

This field is hidden when viewing the form

1a Profile Type -workings

This field is hidden when viewing the form

2a Batten Profile width – workings

This field is hidden when viewing the form

2b Cladding Profile width – workings

This field is hidden when viewing the form

2c Profile width – FINAL

This field is hidden when viewing the form

3a Batten Orientation -workings

This field is hidden when viewing the form

4a Final Height

This field is hidden when viewing the form

5b Final Length

This field is hidden when viewing the form

6a Final Spacing between profiles

This field is hidden when viewing the form

6b Profile + Spacing (mm) – workings

This field is hidden when viewing the form

6c Profile + Spacing (m) – workings

1. Profile Type(Required)

Select profile type and profile size.

2. Batten Profile Size(Required)

Standard Profile Length (m)

2. Cladding Profile Size(Required)

Standard Profile Length (m)

ORIENTATION

Please select which direction your profiles will be installed.

3. Profile Orientation(Required)

AREA – VERTICAL ORIENTATION

Please enter the Wall/Ceiling/Area Height & Length (in meters).
Please note: For Vertical Orientations, this Calculator can only work for area heights up to 12.9m. Contact Us for advice for larger lengths.

4. Area Height (m)(Required)

Please enter a number from 0.1 to 12.9.

5. Area Length (m)(Required)

Please enter a number from 1 to 500.

Total Area Size (m2)

AREA – HORIZONTAL ORIENTATION

Please enter the Wall/Ceiling/Area Height & Length (in meters).

Please note: For Horizontal Orientations, this Calculator can only work for area lengths up to 12.9m. Contact Us for advice for larger lengths.

4. Area Height (m)(Required)

5. Area Length (m)(Required)

Please enter a number from 0.1 to 12.9.

Total Area Size (m2)

BATTEN/SLAT PROFILE SPACING

Enter your desired spacing (in mm) between each batten or slat.

Click to get help selecting Batten Spacing

6. Batten/Slat Spacing (mm)(Required)

CLADDING SHADOWLINE SPACING

The shadowline spacing between cladding boards can be a maximum of 8.5mm.

For no gap please enter 0.

Please note: For Castellated & Cove Claddings – spacing must be 0.

Click here for advice on Cladding Spacing

6. Cladding Shadowline Spacing (mm)(Required)

Please enter a number from 1 to 8.5.

Total Profile Width/Cover + Spacing (mm)

This field is hidden when viewing the form

BATTEN LENGTH

This field is hidden when viewing the form

Profile Length (mm) – workings

This field is hidden when viewing the form

Profile Length (m)

Alteria’s Battens & Claddings come in standard 6.5m lengths

This field is hidden when viewing the form

VERTICAL WORKINGS

This field is hidden when viewing the form

VERTI – Usable wastage

This field is hidden when viewing the form

V1 – How many VERT battens – workings

This field is hidden when viewing the form

V2 – How many vertical battens ROUND UP – workings

This field is hidden when viewing the form

V3 – # 6.5m lengths required – workings

This field is hidden when viewing the form

V4 – # 6.5m lengths required ROUND DOWN- workings

This field is hidden when viewing the form

V5 – How many 6.5m lengths will be required? – workings

This field is hidden when viewing the form

V6 – ADDITIONAL BATTENS TO SUIT HEIGHT OVER 6.5M height

This field is hidden when viewing the form

V7 – how much more m do you need to make additional height (m)

This field is hidden when viewing the form

V8 – how many additional lengths do you get from 6.5m

This field is hidden when viewing the form

V9 – how many additional lengths do you get from 6.5m – ROUDND DOWN

This field is hidden when viewing the form

V10 – how many vertical battens needed to cover the additional

This field is hidden when viewing the form

V11 – how many vertical battens needed to cover the additional ROUND DOWN

This field is hidden when viewing the form

V12 – HOW MANY BATTENS TO SUIT HEIGHT UNDER 6.5M height

This field is hidden when viewing the form

V13 – Batten length required

This field is hidden when viewing the form

V14 – How many required lengths can you get per 6.5m batten

This field is hidden when viewing the form

V15 – How many required lengths can you get per 6.5m batten ROUND DOWN

This field is hidden when viewing the form

V16 – how many do you get from # battens required

This field is hidden when viewing the form

V17 – how many do you get from # battens required ROUND UP

This field is hidden when viewing the form

V18 – OVERALL

This field is hidden when viewing the form

V19 – # battens (6.5m)

This field is hidden when viewing the form

V20- # extra battens for height over 6.5m

This field is hidden when viewing the form

V21 – # battens for height under 6.5m

This field is hidden when viewing the form

V22 – Total # battens needed

This field is hidden when viewing the form

V33 – Total # battens needed ROUND UP

This field is hidden when viewing the form

V34 – REQUIREMENTS

This field is hidden when viewing the form

V35 – TOTAL NUMBER OF BATTENS REQUIRED – 6.5M LENGTH

This field is hidden when viewing the form

V36 – Cutting Schedule

This field is hidden when viewing the form

V37 – # Total Battens Needed (6.5m Lengths)

This field is hidden when viewing the form

V38 – For Area height UNDER 6.5M – Batten will need to be cut to the following length

For Area Height Under 6.5m

This field is hidden when viewing the form

V39 – For Area Height under 6.5m – # of those battens that you will need

This field is hidden when viewing the form

V40 – For Area Height OVER 6.5m – Batten Length #1

This field is hidden when viewing the form

V41 – For Area Height OVER 6.5m – Batten length #1 – You will require the following # 6.5m battens

This field is hidden when viewing the form

V42 – For Area Height OVER 6.5m – batten length #2 – You will also need to cut remaining battens to:

This field is hidden when viewing the form

V43 – For Area Height OVER 6.5m – Batten length #2 You will need The following number of these:

This field is hidden when viewing the form

HORIZONTAL WORKINGS

This field is hidden when viewing the form

HORIZZZ- Usable wastage

This field is hidden when viewing the form

H1 – How many vertical battens – workings

This field is hidden when viewing the form

H2 – How many vertical HORIZ ROUND UP – workings

This field is hidden when viewing the form

H3 – # 6.5m lengths required – workings

This field is hidden when viewing the form

H4 – # 6.5m lengths required ROUND DOWN- workings

This field is hidden when viewing the form

H5 – How many 6.5m lengths will be required? – workings

This field is hidden when viewing the form

H6 – ADDITIONAL BATTENS TO SUIT HEIGHT OVER 6.5M height

This field is hidden when viewing the form

H7 – how much more m do you need to make additional height (m)

This field is hidden when viewing the form

H8 – how many additional lengths do you get from 6.5m

This field is hidden when viewing the form

H9 – how many additional lengths do you get from 6.5m – ROUDND DOWN

This field is hidden when viewing the form

H10 – how many vertical battens needed to cover the additional

This field is hidden when viewing the form

H11 – how many vertical battens needed to cover the additional ROUND DOWN

This field is hidden when viewing the form

H12 – HOW MANY BATTENS TO SUIT HEIGHT UNDER 6.5M height

This field is hidden when viewing the form

H13 – Batten length required

This field is hidden when viewing the form

H14 – How many required lengths can you get per 6.5m batten

This field is hidden when viewing the form

H15 – How many required lengths can you get per 6.5m batten ROUND DOWN

This field is hidden when viewing the form

H16 – how many do you get from # battens required

This field is hidden when viewing the form

H17 – how many do you get from # battens required ROUND UP

This field is hidden when viewing the form

H18 – OVERALL

This field is hidden when viewing the form

H19 – # battens (6.5m) – Battens #1/2

This field is hidden when viewing the form

H20- # extra battens for height over 6.5m – Battens #2/2

This field is hidden when viewing the form

H21 – # battens for height under 6.5m – Battens #1

This field is hidden when viewing the form

H22 – Total # battens needed

This field is hidden when viewing the form

H33 – Total # battens needed ROUND UP

This field is hidden when viewing the form

H34 – REQUIREMENTS

This field is hidden when viewing the form

H35 – TOTAL NUMBER OF BATTENS REQUIRED – 6.5M LENGTH

This field is hidden when viewing the form

H36 – Cutting Schedule

This field is hidden when viewing the form

H37 – # Total Battens Needed (6.5m Lengths)

This field is hidden when viewing the form

H38 – For Area height UNDER 6.5M – Batten will need to be cut to the following length

For Area Height Under 6.5m

This field is hidden when viewing the form

H39 – For Area Height under 6.5m – # of those battens that you will need

This field is hidden when viewing the form

H40 – For Area Height OVER 6.5m – Batten Length #1/2

This field is hidden when viewing the form

H41 – For Area Height OVER 6.5m – Batten length #1 – You will require the following # 6.5m battens

This field is hidden when viewing the form

H42 – For Area Height OVER 6.5m – batten length #2/2- You will also need to cut remaining battens to:

This field is hidden when viewing the form

H43 – For Area Height OVER 6.5m – Batten length #2/2 You will need The following number of these:

This field is hidden when viewing the form

COMBINED RESULTS – H & V

This field is hidden when viewing the form

orientation

100 = vertical 200 = Horizontal

This field is hidden when viewing the form

HV34 – REQUIREMENTS

This field is hidden when viewing the form

HV35 – TOTAL NUMBER OF BATTENS REQUIRED – 6.5M LENGTH

This field is hidden when viewing the form

HV36 – Cutting Schedule

This field is hidden when viewing the form

HV37 – # Total Battens Needed (6.5m Lengths)

This field is hidden when viewing the form

HV38 – For Area height UNDER 6.5M – Batten will need to be cut to the following length

For Area Height Under 6.5m

This field is hidden when viewing the form

HV39 – For Area Height under 6.5m – # of those battens that you will need

This field is hidden when viewing the form

HV40 – For Area Height OVER 6.5m – Batten Length #1

This field is hidden when viewing the form

HV41 – For Area Height OVER 6.5m – Batten length #1/2 – You will require the following # 6.5m battens

This field is hidden when viewing the form

HV42 – For Area Height OVER 6.5m – batten length #2/2 – You will also need to cut remaining battens to:

This field is hidden when viewing the form

HV43 – For Area Height OVER 6.5m – Batten length #2/2 You will need The following number of these:

YOUR ORDER REQUIREMENTS*

Based on your inputs, the below indicates the total number of standard profile lengths (6.5m) required for your project. Please note wastage has not been included.
TIP: Increasing the Profile Spacings can reduce the number of profiles required.

Total Number of Standard Length (6.5m) Profile Lengths required:

Suggested Cutting Schedule

The quantity listed above represents the total number of standard 6.5m lengths that will need to be ordered to meet the project requirements. Below provides guidance on what specific lengths each profile could be cut to, so they meet the height, length and orientation requirements of your project.

Number of Profiles:

Cut to Following Length (m)

Number of Profiles:

Cut to Following Length (m)

Number of Profiles:

Cut to Following Length (m)

Want to send the results to your email?

Enter your details below and we will instantly email you your results.

Name(Required)

Email(Required)

Phone

Project type(Required)

Project State

Would you like to receive pricing?

Yes

Batten Finish

Please advise finish type you are interested in.

Notes/Comments

Notes and Assumptions of Calculator

This calculator is prepared for general purposes only. Please contact Alteria via phone or email for more information or advice. It is the purchasers responsibility to check that the items ordered are correct for what is to be constructed. Alteria is not responsible for any costs incurred for incorrect order quantities.
Cutting schedule is prepared for general purposes only. It is the responsibility of the purchaser to review their own cutting requirements based on the actual requirements of their project Where quantities have been estimated, wastage has not been included. It is the responsibility of the purchaser to check and confirm all quantities and to allow for any wastage that may be required.

ProfileQuantityestimator CALCULATOR

how many PROFILES do you need for your project?

Use our online batten estimator calculator below as a guide to help you determine how many aluminium battens and aluminium cladding panels you will need for your project.

PROFILE TYPE

ORIENTATION

AREA – VERTICAL ORIENTATION

AREA – HORIZONTAL ORIENTATION

BATTEN/SLAT PROFILE SPACING

CLADDING SHADOWLINE SPACING

BATTEN LENGTH

VERTICAL WORKINGS

V6 – ADDITIONAL BATTENS TO SUIT HEIGHT OVER 6.5M height

V12 – HOW MANY BATTENS TO SUIT HEIGHT UNDER 6.5M height

V18 – OVERALL

V34 – REQUIREMENTS

V36 – Cutting Schedule

HORIZONTAL WORKINGS

H6 – ADDITIONAL BATTENS TO SUIT HEIGHT OVER 6.5M height

H12 – HOW MANY BATTENS TO SUIT HEIGHT UNDER 6.5M height

H18 – OVERALL

H34 – REQUIREMENTS

H36 – Cutting Schedule

COMBINED RESULTS – H & V

HV34 – REQUIREMENTS

HV36 – Cutting Schedule

YOUR ORDER REQUIREMENTS*

Suggested Cutting Schedule

Want to send the results to your email?

Notes and Assumptions of Calculator

Profile
Quantity
estimator
CALCULATOR