Alteria
care, maintenance
& warranty
care & maintenance
Alteria Aluminium batten and claddings are low maintenance systems that requires minimal cleaning, especially when compared to timber or steel. To help maintain the integrity of the powder coated finish, it is necessary to consider the care and maintenance requirements.
Cleaning
The best method of cleaning is by regular washing of the coating using a solution of warm water and non-abrasive, pH neutral detergent solution.
Surfaces should be thoroughly rinsed after cleaning to remove all residues. All surfaces
should be cleaned using a soft cloth, sponge or a soft natural bristle brush.
frequency
The required frequency depends on the geographic address of the building, the environment surrounding the building, the location of the products and what standard of appearance is required.
It is also important to consider what atmospheric pollution (including salts) and any prevailing winds and the possibility of air borne debris causing erosive wear of the
powder coating.
For full details of the cleaning and maintenance schedule needed for warranty purposes please refer to the Alteria Care & Maintenance document in Technical Downloads.
Warranty
Alteria products are built to last and are made in Australia using quality components. By following the care and
maintenance instructions, Alteria Aluminium Systems are covered by one of our Signature Warranties.
Refer to the Warranty section for an overview of the warranty periods available for each finish
